The Ann Arbor Chronicle » pottery http://annarborchronicle.com it's like being there Wed, 26 Nov 2014 18:59:03 +0000 en-US hourly 1 http://wordpress.org/?v=3.5.2 Good News: You’re Fired!! http://annarborchronicle.com/2009/04/28/good-news-youre-fired/?utm_source=rss&utm_medium=rss&utm_campaign=good-news-youre-fired http://annarborchronicle.com/2009/04/28/good-news-youre-fired/#comments Tue, 28 Apr 2009 19:32:53 +0000 Dave Askins http://annarborchronicle.com/?p=19195 woman removing bricks from kiln

Kay Yourist opens the kiln after its first firing. It's a brick-by-brick process. The top row is labeling for ease of re-assembly.

By the time The Chronicle arrived at Yourist Gallery on Broadway Street last Wednesday, the temperature had cooled from its maximum of 2300F° to around 170F°.  The owner of the gallery, Kay Yourist, had donned giant leather gloves to open the door to her new kiln after its first complete firing the previous night.

The door to the kiln is actually a wall of un-mortared bricks that gets opened and closed by stacking and unstacking the wall brick by brick. The top few rows of bricks, which were sourced through Schad Boiler Setting Company in Detroit, are custom shaped to match the arch of the kiln’s roof, and labeled to prevent the door-closing task from evolving into a puzzle-solving exercise.

Even though we were there to see the opening, we got a chance to see a bit of the closing process, too – Yourist had actually begun the opening process before we arrived. But she indulged us by first re-stacking the bricks into a solid wall, so we’d have a clearer idea of how it worked.

Unstacking the bricks was slow going at first, but once Yourist had un-wedged the top row, the pace picked up. It wasn’t long before the top front layer of pottery pieces became visible. The kiln has three tiers and a front and a back, so the volume of art work we saw was about a sixth of the kiln’s total capacity.

view of kiln contents after partial unveiling

This collection of pieces was the first to become visible during the unstacking process. It's one of six sections in the three-tiered, two-sided kiln.

It was a story we’d been tracking since talking to Yourist late last year. She’d initially hoped to complete the first firing before the end of 2008, but a mis-communication on the permitting and inspection side of things led to the delay. Hers is a commercial installation, and the initial design had satisfied requirements for a household installation. The key difference was the requirement that the chimney be made of brick as opposed to a steel pipe, and to construct a brick chimney – with mortar, unlike the kiln door – required a moderation in the weather, which finally came a few weeks ago.

On the day before tax day, Yourist emailed us to say that they’d finally passed the mechanical inspection.

A sign in the gallery soliciting contributions to help fund the new kiln indicates there are 1,000 bricks costing about $3 apiece. Yourist said that the dollar amounts of the contributions over the last year and a half were not huge but around 100 people had participated. So it was a way for people to contribute however much they were able, she explained. She said it was particularly gratifying when a child would visit the studio, see the sign, and want to become a part of the project.

Beyond the $3 cost per brick, the project cost included the construction, the gas heating element, plus the remodeling of the studio to provide access to the outdoor kiln. The total cost of the project came to around  $30,000. The design for the work was done by rizzolobrown + novak, with construction completed by Monal, Inc.

Why make the $30,000 capital investment? Yourist said, “I want to give our students the best they can have. If you give people the best you can give, then people will notice.” She explained that part of the project will entail teaching the students at the pottery studio how to use the new kiln. Once the initial learning curve is overcome, she imagined that the big kiln will be fired about once a week.

How much natural gas does it take to fire up the kiln? Yourist said they’ll be able to measure that exactly, because there’s a dedicated gas line just for the kiln.

The contrast between the electric kilns that Yourist has been using and the new gas kiln is the kind of atmosphere that exists inside the kiln during firing. In an electric kiln, you’re just adding heat, so there’s no reduction in oxygen content. With the gas kiln, there’s less oxygen, due to combustion, and the additional carbon adds more interest to the glazes on the pots, Yourist explained. It means that predicting results with the gas kiln is a little harder.

As for the studio’s three electric kilns – they’re not getting fired, erm, or  they’re still going to get fired, too. That is, Yourist is keeping the electric kilns.

Celebratory champagne

Celebratory champagne.

permits for construction taped to glass

Permits and inspections for the kiln and the remodeling work.

Thermometer for kiln

Thermometer for the kiln.

hand feeling heat from kiln

Ooooh WARM!

]]>
http://annarborchronicle.com/2009/04/28/good-news-youre-fired/feed/ 1
HD Totter Watch: Potter on a Totter http://annarborchronicle.com/2008/11/20/hd-totter-watch-potter-on-a-totter/?utm_source=rss&utm_medium=rss&utm_campaign=hd-totter-watch-potter-on-a-totter http://annarborchronicle.com/2008/11/20/hd-totter-watch-potter-on-a-totter/#comments Thu, 20 Nov 2008 12:13:12 +0000 HD http://annarborchronicle.com/?p=8469 Teapot on display at Yourist Studio Gallery.

Teapot on display at Yourist Studio Gallery.

Many readers of Teeter Talk will have surely seen Yourist Pottery Gallery’s sign from the Plymouth Road side as they’ve headed into or out of Ann Arbor across Broadway Bridge. A smaller number will have seen the signage from the more lightly traveled Broadway Street side. And some readers will have also seen the place from the inside. Last Friday, I took the totter to the potter: Kay Yourist.

Navigating a 12-foot long board amongst some really pretty pottery is not for the faint of heart. But we managed to do it without wrecking the place, preserving the perfect safety record of the totter to date.

Skeptics who think I must have busted a pot or two are invited to verify for themselves that the floor is not littered with shards of broken pots–when Yourist Pottery hosts its annual holiday sale. The opening reception for that (including wine and appetizers) is Friday, 5 December from 6pm-9pm.

Off the totter, Kay related a great story about her first wheel–she bartered it away when she was short of the cash that she needed to pay the entry fee to the Ann Arbor art fair.

Kay Yourist demonstrates the treadle-style wheel she purchased for $175 when she was in high school.

Kay Yourist demonstrates the treadle-style wheel she purchased for $175 when she was in high school.

But clearly, she’s got it back now–that’s the wheel in the photograph included here. For details on how she got it back, ask Kate herself. (Note: The pot she’s throwing as a demonstration in the photo is visible only to the pure of heart.)

On the totter, the potter talked about the new kiln that has to be closed and opened one brick at a time, plus the teapot (it’s functional) shown here, and her first wheel, which I was delighted to discover is human-powered.

In the Talk you can also read about and see a photograph of a first-time ever execution on the Teeter Talk totter of a perfect float.

]]>
http://annarborchronicle.com/2008/11/20/hd-totter-watch-potter-on-a-totter/feed/ 0